[100% Pass Guarantee] Latest Cisco 300-075 Dumps Exam Questions And Answers

Posted on by

The best and most updated CCNP Collaboration 300-075 training materials, high quality Cisco CCNP Collaboration 300-075 training materials. Latest Cisco 300-075 dumps exam training material in PDF format, download one of the many PDF readers that are available for free.

Question No : 1
Company X currently uses a Cisco Unified Communications Manager, which has been configured for IP desk phones and Jabber soft phones. Users report however that whenever they are out of the office, a VPN must be set up before their Jabber client can be used. The administrator for Company X has deployed a Collaboration Expressway server at the edge of the network in an attempt to remove the need for VPN when doing voice.
However, devices outside cannot register.
Which two additional steps are needed to complete this deployment? (Choose two.)
A. A SIP trunk has to be set up between the Expressway-C and Cisco UCM.
B. An additional interface must be enabled on the Cisco UCM and placed in the same subnet at the Expressway.
C. The customer firewall must be configured with any rule for the IP address of the external Jabber client.
D. The Expressway server needs a neighbor zone created that points to Cisco UCM.
E. Jabber cannot connect to Cisco UCM unless it is on the same network or a VPN is set up from outside.
Answer: A,D
300-075
Question No : 2
An engineer is configuring Global Dial Plan Replication and wants to prevent the local cluster from routing the Vice President number 5555555555 to the remote cluster. Which action accomplishes this task?      300-075 dumps
A. Create a block route pattern.
B. Create a block learned pattern.
C. Create a block transformation pattern.
D. Create a block translation pattern.
Answer: C

Question No : 3
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: A,C

Question No : 4
Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST without MGCP fallback
B. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
C. SRST with MGCP fallback
D. Cisco Unified Communications Manager Express in SRST mode
Answer: C

Question No : 5
When video endpoints register with Cisco Unified Communications Manager, where are DSCP values configured?
A. in Unified CM, under Enterprise Parameters Configuration
B. in Unified CM, under Device > Device Settings > Device Defaults
C. in Unified CM, under Service Parameters > Cisco CallManager Service > Cluster-wide Parameters
D. DSCP parameters are always configured on each individual video endpoint.
Answer: C

Question No : 6
Which three statements about configuring an encrypted trunk between Cisco 300-075 dumps TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)
A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.
B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
C. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.
D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.
E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.
F. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.
G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.
Answer: A,C,E

Read more: http://www.lead4pass.com/300-075.html

Reference: http://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ciptv2.html

         

Comments are disabled