Tag Archives: 300-375 wisecure pdf

Cisco CCNP Wireless 300-375 dumps, 300-375 exam practice test questions and answers

Posted on by
latest 300-375 dumps

Real and effective Cisco CCNP Wireless 300-375 dumps, online Cisco 300-375 exam practice test, free online download 300-375 pdf! Pass the 300-375 exam “Securing Cisco Wireless Enterprise Networks (WISECURE)”: https://www.lead4pass.com/300-375.html (125 Q&As) Follow me! Get more latest effective exam dumps!

[PDF] Free Cisco CCNP Wireless 300-375 pdf dumps download from Google Drive: https://drive.google.com/open?id=1-3vPMuNCr3Z6ECJZiJQL05RA6dTAFn_o

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

300-375 WISECURE – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/wisecure.html

Free test Cisco CCNP Wireless 300-375 Exam Questions and Answers

A corporation has recently implemented a BYOD policy at their HQ. Which three risks should the security director be
concerned about? (Choose three.)
A. unauthorized users
B. rogue ad-hocs
C. software piracy
D. lost and stolen devices
E. malware
F. keyloggers
Correct Answer: ACE


An engineer must change the wireless authentication from WPA2-Personal to WPA2-Enterprise. Which three
requirements are necessary? (Choose three.)
B. 802.1X
D. pre-shared key
E. 802.11u
F. fast secure roaming
G. 802.11i
Correct Answer: ACG
Difference between WPA called Personal and Enterprise is the authentication method:
Personal WPA relies on a PSK secret (Pre-Shared Key), and you don\\’t need an external server to perform
Enterprise WPA (as defined in the 802.11i standard) uses WPA2 with AES-CCM encryption, and authentication is
based on 802.1x/EAP using the RADIUS protocol.


Which security method does a Cisco guest wireless deployment that relies on the Cisco ISE guest portal for user
authentication and to an Anchor WLC for DHCP use?
A. Layer 2 and Layer 3
B. Layer 2 only
C. No security methods are needed to deploy CWA
D. Layer 3 only
Correct Answer: B


Which condition introduce security risk to a BYOD policy?
A. enterprise-managed MDM platform used for personal devices
B. access to LAN without implementing an MDM solution
C. enforcement of BYOD access to internet only network
D. enterprise life-cycle enforcement of personal device refresh
Correct Answer: B


On which two ports does the RADIUS server maintain a database and listen for incoming authentication and accounting
requests? (Choose two.)
A. UDP 1900
B. UDP port 1812
C. TCP port 1812
D. TCP port 1813
E. UDP port 1813
Correct Answer: BE
Explanation: RADIUS messages are sent as User Datagram Protocol (UDP) messages. UDP port 1812 is used for
RADIUS authentication messages and UDP port 1813 is used for RADIUS accounting messages. Some network
access servers might use UDP port 1645 for RADIUS authentication messages and UDP port 1646 for RADIUS
accounting messages. By default, IAS supports receiving RADIUS messages destined to both sets of UDP ports.
Reference: https://technet.microsoft.com/en-in/library/cc781821(v=ws.10).aspx


An engineer is configuring client MFP. What WLAN Layer 2 security must be selected to use client MFP?
A. Static WEP
C. WPA + WPA2 D. 802.1x
Correct Answer: C
Explanation: In 802.11, management frames such as (de)authentication, (dis)association, beacons, and probes are
always unauthenticated and unencrypted. In other words, 802.11 management frames are always sent in an unsecured
manner, unlike the data traffic, which is encrypted with protocols such as WPA, WPA2, or, at least, WEP, and so
Reference: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/82196-mfp.html#climfp


When a network engineer plans to implement the client MFP, which three settings should be supported by the client?
(Choose three.)
A. Cisco Compatible Extensions v5
B. Short Preamble check box
D. WPA2 with TKIP
E. WPA with TKIP
F. WPA2 with AES
Correct Answer: ADF


Which three commands are part of the requirements on a Cisco Catalyst 3850 Series Switch with Cisco IOS XE to
create a RADIUS authentication server group? (Choose three.)
A. authentication dot1x default local
B. aaa session-idcommon
C. dot1x system-auth-control
D. aaa new-model
E. local-auth wcm_eap_prof
F. security dot1x
G. dot1x config-auth-control
Correct Answer: BCD
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_rad/configuration/xe-3se/3850/sec-usr-rad-


An engineer is configuring EAP-TLS with a client trusting server model and has configured a public root certification
authority. Which action does this allow?
A. utilizes two sub-certification servers
B. validates the AAA server
C. creates a PKI infrastructure
D. specifies a second certification authority to trust
Correct Answer: B


Refer to the exhibit.

lead4pass 300-375 exam question q10

You are configuring a controller that runs Cisco IOS XE by using the CLI. Which three configuration options are used for
802.11w Protected Management Frames? (Choose three.)
A. mandatory
B. association-comeback
C. SA teardown protection
D. query-retry-time
E. enable
F. comeback-time
Correct Answer: ABD
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/11rkw


A customer wants to allow employees to easily onboard their devices to the wireless network. Which process can be
configured on Cisco ISE to support this requirement?
A. self-registration guest portal
B. client provisioning
C. native supplicant provisioning
D. local web auth
Correct Answer: B


How many mobility peers can a Cisco Catalyst 3850-MC node have?
A. 8
B. 2
C. 6
D. 16
E. 4
Correct Answer: A
The Mobility Controller (MC) role is supported on a number of different platforms like, the Cisco WLC 5700 Series,
CUWN and Catalyst 3850 Switches. The scale requirements on these three platforms are summarized in the table
below:lead4pass 300-375 exam question q12

Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/mobility/configuration_


An engineer is implementing SNMP v3 on a Cisco 5700 Series WLC. Which three commands are the minimum needed
to configure SNMP v3? (Choose three.)
A. SNMP-server enable traps
B. SNMP-server group
C. SNMP-server user
D. SNMP-server community
E. SNMP-server context
F. SNMP-server engineID
Correct Answer: BCF

Share the latest Cisco CCNP Wireless 300-375 dumps and online exam exercises for free! 300-375 exam questions and answers! Improve your skills and exam experience! Pass the 300-375 exam: https://www.lead4pass.com/300-375.html (125 Q&As). Follow me! Get more up-to-date and valid exam dumps.

Related 300-375 Popular Exam resources

titlepdf youtube 300-375 WISECURE – Cisco lead4pass
Cisco 300-375 lead4pass 300-375 dumps pdf lead4pass 300-375 youtube 300-375 WISECURE – Cisco https://www.lead4pass.com/300-375.html
Cisco CCNP Wireless https://www.lead4pass.com/300-375.html

Lead4pass Promo Code 12% Off

lead4pass 300-375 coupon

Why Choose Lead4pass?

Lead4Pass helps you pass the exam easily! We compare data from all websites in the network, other sites are expensive,
and the data is not up to date, Lead4pass updates data throughout the year. The pass rate of the exam is above 98.9%.

why lead4pass 300-175 dumps