Pass the Microsoft MCSA 70-410 exam.
“Installing and Configuring Windows Server 2012 “: https://www.lead4pass.com/70-410.html (Total Questions: 532 Q&As).
I know you most want to get here for free 70-410 dumps. The latest free 70-410 exam practice questions and 70-410 pdf help you improve your skills and exam experience!
Table of Contents:
- Latest Microsoft MCSA 70-410 pdf
- Test your Microsoft MCSA 70-410 exam level
- Watch the Microsoft MCSA 70-410 video tutorial online
- Related 70-410 Popular Exam resources
- Get Lead4Pass Coupons (12% OFF)
- What are the advantages of Lead4pass?
Latest Microsoft MCSA 70-410 pdf
[PDF] Free Microsoft MCSA 70-410 pdf dumps download from Google Drive: https://drive.google.com/open?id=1JBHUP0X7mq_vqacwDdz5KJyZIKirsO49
Exam 70-410: Installing and Configuring Windows Server 2012: https://www.microsoft.com/en-us/learning/exam-70-410.aspx
Test your Microsoft MCSA 70-410 exam level
QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1
that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1
(SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server
Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.)
A. Run the systempropertiesremote. execommand.
B. Run the Fnable-PsRemoting cmdlet.
C. Run the Enable-PsSessionConfigurationcmdlet.
D. Run the Confiqure-SMRemoting.ps1script.
E. Run the Set-ExecutionPolicycmdlet.
Correct Answer: DE
The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To
configure Server Manager remote management by using Windows PowerShell On the computer that you want to
manage
remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click
Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as
administrator.
In the Windows PowerShell session, type the following, and then press Enter.
Set-ExecutionPolicy -ExecutionPolicyRemoteSigned
Type the following, and then press Enter to enable all required firewall rule exceptions.
Configure-SMRemoting.ps1 -force ?nable.
QUESTION 2
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to enable Hyper-V Network Virtualization on Server1.
You need to install the Windows Network Visualization Filter Driver on Server1.
Which Windows PowerShell cmdlet should you run?
A. Set-NetVirtualizationGlobal
B. Enable-NetAdapterBinding
C. Add – WindowsFeature
D. Set-NetAdapterVmq
Correct Answer: B
Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each virtual network operates
as if it is running as a physical network. The Set-NetAdaptercmdlet sets the basic properties of a network adapter such
as virtual LAN (VLAN) identifier (ID) and MAC address. Thus if you add the binding parameter to the command then you
will be able to install the Windows Network Virtualization Filter Driver. Step one: Enable Windows Network Virtualization
(WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical
NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the
server. This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose
and it is not some global setting. If you have one External Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch
-SwitchType External # Check if Network Virtualization is bound # This could be done by checking for the binding and
seeing if it is enabled ForEach-Object -InputObject $vSwitch { if ((Get-NetAdapterBinding -ComponentID “ms_netwnv”
-InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable it Enable-
NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID “ms_netwnv” } }
QUESTION 3
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named
Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012
installed.
You have been instructed to modify an Active Directory computer object.
Which of the following actions should you take?
A. You should consider making use of the Get-ADComputer Windows PowerShell cmdlet.
B. You should consider making use of the Set-ADComputer Windows PowerShell cmdlet
C. You should consider making use of the New-ADComputer Windows PowerShell cmdlet
D. You should consider making use of the Get-ADComputerServiceAccount Windows PowerShell cmdlet
Correct Answer: B
Set-ADComputer ?Modifies an Active Directory computer object.
QUESTION 4
You have a laptop named Computer1. Computer1 runs Windows 8.1 Enterprise.
Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network
named Network1.
For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system. You install the
drivers for the wireless network adapter.
You need to ensure that you can connect to Network1 from Windows Server 2012 R2.
What should you do?
A. Restart the WLAN AutoConfig service.
B. From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.
C. From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.
D. From Server Manager, install the Wireless LAN Service feature.
Correct Answer: D
QUESTION 5
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named
Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been
instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from
ENSUREPASS-SR01 using Server Manager.
Which of the following is not a valid option to take? (Choose all that apply.)
A. You could access the server manager on ENSUREPASS-SR07.
B. You could access the server manager on ENSUREPASS-SR13.
C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on
ENSUREPASS-SR13.
D. You could run the Configure-SMRemoting.exe ?enable cmdlet on ENSUREPASS-SR07.
Correct Answer: BC
QUESTION 6
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain
contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to add a new domain controller to the domain.
You install Windows Server 2012 R2 on a new server named DC3.
Which cmdlet should you run next?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install WindowsFeature
D. Install AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Correct Answer: C
It is the 2nd step when installing a DC by PowerShell on a fresh server.
QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1
that runs Windows Server 2012 R2.
You create a new inbound rule by using Windows Firewall with Advanced Security.
You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a
network address translation (NAT) device on the network.
Which setting in the rule should you configure?
A. Interface types
B. Authorized computers
C. Remote IP address
D. Edge traversal
Correct Answer: D
Edge traversal ?This indicates whether edge traversal is enabled (Yes) or disabled (No). When edge traversal is
enabled, the application, service, or port to which the rule applies is globally addressable and accessible from outside a
network address translation (NAT) or edge device.
Select one of the following options from the list: Block edge traversal (default) ?Prevent applications from receiving
unsolicited traffic from the Internet through a NAT edge device. Allow edge traversal ?Allow applications to receive
unsolicited traffic directly from the Internet through a NAT edge device. Defer to user ?Let the user decide whether to
allow unsolicited traffic from the Internet through a NAT edge device when an application requests it. Defer to
application ?Let each application determine whether to allow unsolicited traffic from the Internet through a NAT edge
device.
Reference: http://technet.microsoft.com/en-us/library/cc731927.aspx
QUESTION 8
Your network contains three servers. The servers are configured as shown in the following table.
Your company plans to standardize all of the servers on Windows Server 2012 R2. You need to recommend an upgrade
path for each server. The solution must meet the following requirements:
· Upgrade the existing operating system whenever possible.
· Minimize hardware purchases.
Which upgrade path should you recommend for each server?
To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used
once, more than once, or not at all.
Select and Place:
Upgrade paths for Windows Server 2012 R2 are limited. In fact, it’s easier to specify when you can perform an upgrade
than when you can’t. If you have a 64-bit computer running Windows Server 2008 or Windows Server 2008 R2, then
you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system edition. Windows Server
2012 R2 does not support the following: Upgrades from Windows Server versions prior to Windows Server 2008
Upgrades from pre-RTM editions of Windows Server 2012 R2 Upgrades from Windows workstation operating systems
Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012 Upgrades from any
Itanium edition Cross-language upgrades, such as from Windows Server 2008, U.S.English to Windows Server 2012,
French In any of these cases, the Windows Setup program will not permit the upgrade to proceed. References:
http://technet.microsoft.com/en-us/library/jj134246.aspx
QUESTION 9
Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller
named DC1. When you run ping dcl.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit
button.)
You need to ensure that DC1 can respond to the Ping command. Which rule should you modify? To answer, select the
appropriate rule in the answer area.
Hot Area:
Correct Answer:
ICMP should have been enabled when ADDS was installed
QUESTION 10
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named
Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-
SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06.
Which of the following actions should you take?
A. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
B. You should consider accessing the Server Manager console on ENSUREPASS-SR06.
C. You should consider accessing the TS Manager console on ENSUREPASS-SR07
D. You should consider accessing the TS Manager console on ENSUREPASS-SR06.
Correct Answer: B
QUESTION 11
You have a Hyper-V host named Host1. Host1 contains two virtual machines named VM1 and VM2. VM1 is configured
as a print server. VM1 runs Windows Server 2008 R2. VM2 is configured as a file server. VM2 runs Windows Server
2012 R2.
You need to migrate all of the printers on VM1 to VM2.
Which actions should you perform on the virtual machines? To answer, drag the appropriate action to the correct
servers in the answer area. Each action may be used once, more than once, or not at all. You may need to drag the split
bar
between panes or scroll to view content.
Select and Place:
Correct Answer:
On VM1 we export the printers. On VM2 we first install the Print and Document Services role, and then import the
printers. You must install the Print and Document Services role on the destination server before you begin the migration process.
QUESTION 12
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member
servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an
organizational
unit (OU) named ServersAccounts.
Servers are restarted only occasionally.
You need to identify which servers were restarted during the last two days.
What should you do?
A. Run dsquerycomputer and specify the ?talepwd parameter.
B. Run Get-ADComputer and specify the SearchScope parameter.
C. Run Get-ADComputer and specify the IastLogon property.
D. Run dsquery server and specify the ? parameter
Correct Answer: C
QUESTION 13
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named
Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2
installed.
You are running a training exercise for junior administrators. You are currently discussing the Virtual Fibre Channel SAN
feature.
Which of the following is TRUE with regards to the Virtual Fibre Channel SAN feature? (Choose all that apply.)
A. It prevents virtual machines from connecting directly to Fibre Channel storage.
B. It allows for virtual machines to connect to Fibre Channel storage directly.
C. It includes support for virtual SANs, live migration, and multipath I/O.
D. It includes support for virtual SANs, and live migration, but not multipath I/O.
Correct Answer: BC
To gain the full benefits of server virtualization and cloud architectures, virtualized workloads need to connect easily and
reliably to existing SANs. For many enterprise organizations, Hyper-V deployments were limited in scale and scope
because they lacked the ability to directly connect VMs to Fibre Channel SAN storage from inside a VM. Hyper-V in
Windows Server 2012 R2 now provides virtual Fibre Channel Host Bus Adapter (HBA) ports within the guest operating
system that runs the virtual machine, connecting virtual machines directly to FibreChannel SAN Logical Unit Numbers
(LUNs).
Virtual Fibre Channel for Hyper-V provides several important advantages for Hyper-V environments:
Simplifies storage connectivity for virtualized workloads to ultra-reliable, high-performance Fibre Channel SAN storage.
Enables new solutions that require shared storage, such as failover clustering, live migration, andmultipath I/O.
Leverages and protects existing investments in Fibre Channel storage?
Enables advanced FC SAN storage functionality for VMs.
Facilitates migration of FC workloads into the cloud.
Enables improved monitoring and troubleshooting, with visibility from the VM to the FC SAN storage.
Enables centralized management of Ethernet and FC-based virtualized workloads.
Combining Virtual Fibre Channel for Hyper-V and the Brocade Fibre Channel SAN infrastructure greatly simplifies
connectivity between Fibre Channel SAN storage and virtualized applications, enabling enterprise IT and hosting
providers to
achieve new levels of availability, reliability, and scalability for cloud-based services.
You need your virtualized workloads to connect easily and reliably to your existing storage arrays. Windows Server
2012 R2 provides Fibre Channel ports within the guest operating system, which allows you to connect to Fibre Channel
directly from within virtual machines. This feature protects your investments in Fibre Channel, enables you to virtualize
workloads that use direct access to Fibre Channel storage, allows you to cluster guest operating systems over Fibre
Channel, and provides an important new storage option for servers hosted in your virtualization infrastructure.
With this Hyper-V virtual Fibre Channel feature, you can connect to Fibre Channel storage from within a virtual machine.
This allows you to use your existing Fibre Channel investments to support virtualized workloads. Support for Fibre
Channel in Hyper-V guests also includes support for many related features, such as virtual SANs, live migration, and
MPIO.
Watch the Microsoft MCSA 70-410 video tutorial online
We offer more ways to make it easier for everyone to learn, and YouTube is the best tool in the video. Follow channels: https://www.youtube.com/channel/UCXg-xz6fddo6wo1Or9eHdIQ/videos get more useful exam content.
Related 70-410 Popular Exam resources
Get Lead4Pass Coupons(12% OFF)
What are the advantages of Lead4pass?
We have a number of Microsoft, Microsoft, IBM, CompTIA, and other exam experts. We update exam data throughout the year.
Top exam pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!
Summarize:
Free Microsoft Proctored Exams for Validating Knowledge 70-410 exam exercise questions and answers, 70-410 pdf and 70-410 video practice questions. These will help you improve your exam experience.
I know you want to easily get 70-410 certification! It’s not hard! Experts recommend https://www.lead4pass.com/70-410.html
help you easily get certified.
